Car/Truck Parts 4 Sale

WANTED: I need the left rear interior window sill steel trim that caps off the top of the inner trim panel, needs to be a good chromeable piece, pre-chromed would be preferable. Also need the short curved stainless that goes near the bottom of the right side rear arm rest for a 2DR, must be clean, no dents, and have all three attachment prongs. Contact Mike
*55 - 57 Chevy* Danchuck pt# 12370 rear quarter window frames for Hardtop, upper and lower, NEW reproductions, not used. $247 at Danchuck today PLUS TAX & Shipping, sell mine for $210 OBO plus shipping from So Cal. Glass available separately, both sides new from Classic Chevy, tempered glass, $50 pair OBO plus shipping $250 for glass and frames together!! plus shipping Contact Mike
This is a newly rebuilt, never used, Saginaw power steering pump, fits 55 - 72 GM's. The only difference between this one and yours might be the angle and bend to the fluid return line on the tank. Your tank is easily switched with the tank on this one if needed, probably five minutes or so. This came from Classic Chevy Pt # 53-28 and retails today for $110, asking $90 shipping from So Cal in their box to me. Contact Mike
RARE Original distributor for Chevy Big Block, stamp # 0000069 6K17, removed from 67 Camaro 396-325 HP Mark IV, also is CORRECT for 1967 396-325HP All Passenger, Camaro, Chevelle, Canada Pass, 427-385HP w/AC Passenger, 396-350HP w/AC Chevelle, 1968 396-325HP All Pass, Camaro, Chevelle, Canada Pass., 396-350HP w/Auto Trans Chevy II, Camaro, Chevelle, 427-390HP All Pass., 427 All Canada Pass., 396 All Canada Chevelle, will actually fit any BB but the authentic applications are listed here. Been stored since June, 1976, removed the engine in my '57, excellent and tight, new points, cond, rotor. Asking $200 OBO + shipping from Lake Forest, Ca. Contact Mike
This is a NEW in the box Grant Classic Walnut & Chrome steering wheel with the installation kit for 55-57 Chevys, (kit has some used parts, steering column housing, grey column collar NOT included). It is available separately, for manual trans @ $25. It probably will fit many others too with a three hole mount and the proper installation kit. Measures 15" dia. and 4½” deep. Asking $150 OBO plus shipping from So Cal. Summit Racing has Grant wood wheels starting at $329 ! But this Classic style is no longer available!! Contact Mike
These 55-57 vent window transmissions are OEM, clean, tight, lubed and ready to install, do not have the disk plugs in the bottoms, (never seen any that do!), asking $50 OBO for the pair, sold as pair only plus shipping from So Cal Contact Mike
55-57 Door Mechanisms are OEM, clean, tight, lubed and ready to install, asking $60/pr, sold as pair only, these are $99/pr for repros at Classic Chevy. Door strikers are OEM, clean and tight, fit 55 - 62 models. Asking $40/pr, sold as pair only. These are all from my 57 and stored since June 1976. All above plus shipping from So Cal. Contact Mike
These are NEW Danchuck seals for the inner rear wheel house on all 55-57's. DC Pt #851 selling at $19.95 plus tax and shipping today. I am asking only $10 plus shipping from So Cal. Contact Mike
These original hood hinges are from my 57 and have been stored since June 1976 ! They are tight and perfect and fit 55-57. We painted them my car color then I went with new stainless hinges. Asking $80/pr OBO plus shipping from So Cal. (sold as a pair only) Also have a pair of hinges that have had the spring hooks removed, why I do not know! But asking $25/pr (sold as pair only) plus shipping. Contact Mike
Big Block long water pump. Numbers on Pump GM2 3931065T H 7 8 (H=August, day 7, 1968) Also fits 1969 Passenger 396 - 265hp, 427-335, 390, 425hp, Chevelle 396-325, 350, 375hp, 427-425hp, Camaro 396-325, 350, 375hp, 427-425, 430hp. Chevy II 396-350, 375hp and some '70's. Ideal for a big block conversion with the radiator moved out to the 6cyl position. Excellent, needs re-paint, working great when removed from the big block in my 57, Asking $75 OBO shipping from So Cal. Contact Mike
I have an original 55 - 57 (out of my 57) radiator for sale. It was re-cored several years ago but has not been used. A little "sitting outside" grunge but a pressure wash and a coat of black paint will do the trick. From a V8 and has the A/T cooling fittings at the bottom. Top tank could use some slight smoothing if you are picky otherwise excellent condition. Numbers on the tank are Harrison 3136158 R-03 56L (Dec 56 production date). Asking $150 OBO plus shipping from So Cal. Local pick up preferred. Contact Mike

I have an excellent 55-57 6cyl radiator core support. From my 57 with a big block. Support is uncut straight and "perfect". Can be used with a 6cyl or for big block conversion as the radiator sits in front of the support. I replaced it with a custom made support and radiator with this rebuild. Asking $125 OBO + shipping from So Cal, local pick up preferred. Contact Mike
NEW Comp Cams High Energy 1.7 ratio OEM style rockers for 7/16" studs. I installed and removed, never started the engine and went with roller tips, larger push rods, etc. With rocker balls and nuts, asking $95 OBO, these are $115 tax & shipping at Summit Racing today. Plus shipping from So Cal. Contact Mike
OEM 1.7 ratio rockers for 7/16" studs, some new and some used but great condition includes rocker balls and nuts, NEW Comp Cams springs with inner dampener, OEM push rod guide plates for 5/16" rods (the thick good ones!, DO NOT use after market guide plates!!!!, I broke two of those cheesy things). Asking $80 plus shipping from So Cal. Contact Mike
55-57 RIGHT HAND (Pass) OEM rear quarter window frame, top and bottom. Needs some minor restoration and re-chrome but not a river find! Asking $35 plus shipping from So Cal. Closer photo's available, just email me. Contact Mike
California style One-Piece FRONT bumper from my 57 and has been stored inside since 1976. Needs some straightening along lower lip from a tow hook before I got it but simple for any bumper shop before re-chroming. Also small ding in leading edge. Includes original guards but NOT the rubber bullets. Asking $500 or best offer plus shipping from So Cal. Photo's to follow. Contact Mike
2 Complete '57 three-piece original REAR bumpers. #1: Very good and straight center section, very good for both ends. Asking $250 or best offer. #2: Center section has a couple of small dents, easily straighted by the bumper/chrome shop, ends are with minor straightening needed at outer bracket holes. Asking $200 OBO. Both plus shipping from Lake Forest, Ca. Photo's to follow. Contact Mike

	Misc MOPAR Parts MAKE OFFERS! Contact Steve or Cherie